BTHSX - PWC POLYURETHANE AEROSOL COLORS
- MSDS: BTHSX
- Manufacturer: PACIFIC WEST CHEMICAL CORP
- Product Name: PWC POLYURETHANE AEROSOL COLORS
- National Stock Number: 8010-00-181-8255
Product Identification
Product ID:PWC POLYURETHANE AEROSOL COLORS
MSDS Date:05/19/1992
FSC:8010
NIIN:00-181-8255
Kit Part:Y
MSDS Number: BTHSX
Responsible Party
CORTE MADERA, CA 94925-0183
US
Emergency Phone: 415-924-4560
Info Phone: 415-924-4560 FAX-4425
Cage: 58977
Contractor
Telephone: 415-924-4560
Cage: 58977
Ingredients
ACETONE (SARA III)
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 34%
OSHA PEL 1000PPM
ACGIH TLV: 750PPM/1000STEL;9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
N-BUTYL ACETATE (SARA III)
CAS: 123-86-4
RTECS: AF7350000
OSHA PEL 150 PPM
ACGIH TLV: 150 PPM/200STEL;9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 13%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM/150STEL;9394
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
STODDARD SOLVENT
CAS: 8052-41-3
RTECS: WJ8925000
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM; 9394
PROPANE
CAS: 74-98-6
RTECS: TX2275000
OSHA PEL 1000 PPM
ACGIH TLV: ASPHYXIANT; 9394
ISOBUTANE
CAS: 75-28-5
RTECS: TZ4300000
N-BUTANE
CAS: 106-97-8
RTECS: EJ4200000
OSHA PEL 800 PPM
ACGIH TLV: 800 PPM; 9394
VOLATILE ORGANIC COMPOUNDS
RTECS: 9999999VO
Fraction By Weight: 60.7%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN:MAY CAUSE IRRITATION.EYES:MAY
CAUSE IRRITATION.INGEST:UNLIKELY ROUTE OF EXPOSURE.INHAL:MAY
IRRITATE RESPIRATORY TRACT.SOLVENTS HAVE AN ANETHETIC EFFECT(CAUSES
CNS DEPRESSION).
Explanation of Carcinogenicity:THERE ARE NO INGREDIENTS ABOVE 0.1%
WHICH ARE IDENTIFIED AS CARCINOGENS BY NTP,IARC OR OSHA.
Effects of Overexposure:SKIN:BURNING SENSATION.POSSIBLE DERMATITIS FROM
PROLONGED EXPOSURE.INHAL:HEADACHE,DIZZINESS,NAUSEA,POSSIBLY
UNCONSCIOUSNESS.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING
RESPIRATORY AILMENTS MAY BE AT INCREASED RISK FROM EXPOSURE.
First Aid
First Aid:SKIN:REMOVE CONTAMINATED CLOTHING;WASH WITH WATER.EYES:FLUSH
WITH WATER FOR 15 MINUTES.INHAL:REMOVE TO FRESH AIR.GIVE OXYGEN OR
ARTIFICIAL RESPIRATION IF NEEDED.INGEST:DO NOT INDUCE VOMITING.GET
PROMP T QUALIFIED MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:TCC
Flash Point:-26F,-32C
Lower Limits:0.7
Upper Limits:12.8
Extinguishing Media:ALCOHOL,ALCOHOL FOAM,CARBON DIOXIDE,DRY
CHEMICAL,WATER FOG.
Fire Fighting Procedures:USE A SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE EQUIPMENT.COOL FIRE EXPOSED CONTAINERS WITH WATER
SPRAY.
Unusual Fire/Explosion Hazard:CONTAINERS MAY EXPLODE FROM HEAT OF FIRE.
Accidental Release
Spill Release Procedures:REMOVE SOURCES OF IGNITION.VENTILATE AREA.SOAK
UP WITH NON-COMBUSTIBLE INERT ADSORBANT(EG.CLAY);PLACE COLLECTED
MATERIEL IN AN APPROPRIATE CONTAINER FOR DISPOSAL.
Neutralizing Agent:NONE
Handling
Handling and Storage Precautions:STORE BELOW 120F.DO NOT STORE NEAR
HEAT OR FLAMES.
Other Precautions:DO NOT GET IN EYES.DO NOT BREATHE VAPORSAVOID SKIN
CONTACT.DO NOT TAKE INTERNALLY.DO NOT SMOKE.TREAT DUST FROM SANDING
DRIED FILM AS A NUISANCE HAZARD;TLV=10MG/M3.
Exposure Controls
Respiratory Protection:USE A NIOSH APPROVED RESPIRATOR FOR ORGANIC
VAPOR AND PARTICULATES.
Ventilation:LOCAL VENTILATION AT THE WORKSITE;MECHANICAL(GENERAL)
VENTILATION TO MAINTAIN TLV/PEL.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:SAFETY GLASSES
Other Protective Equipment:PROVIDE A LOCAL EYE WASH STATION AND SAFETY
SHOWER.
Work Hygienic Practices:WASH HANDS.SEPERATE WORK CLOTHES FROM STREET
CLOTHES.LAUNDER WORK CLOTHES BEFORE REUSE.KEEP FOOD OUT OF THE WORK
AREA.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:V3
Boiling Pt:B.P. Text:-10F,-23C
Vapor Density:>1 AIR=1
Spec Gravity:0.7
Evaporation Rate & Reference:>1 NBUAC=1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AEROSOL.LIQUID;OPAQUE;SOLVENT-LIKE ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON
DIOXIDE,HYDROGEN CHLORIDE,PHOSGENE(TRACES).
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL,STATE AND
LOCAL REGULATIONS.DO NOT INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.